OSwatcher on Exadata

      OSwatcher作为Oracle官方推荐的OS层面运行状态检测的脚本工具。在Exadata是默认已经安装。

但是Exadata是如何在系统启动后，自动启动OSwatcher呢？我们如何去修改OSwatcher的参数，来调整监控和日志保存的策略呢？

     本文正是介绍，从系统启动到OSwatcher运行，中间经历过的脚本调用，以及如何修改OSwatcher参数的。

1. 首先检查rc.local文件，可以发现/etc/rc.d/rc.Oracle.Exadata

# vi /etc/rc.d/rc.local

-----------------------------------------

########### BEGIN DO NOT REMOVE Added by Oracle Exadata ###########

if [ -x /etc/rc.d/rc.Oracle.Exadata ]; then

  . /etc/rc.d/rc.Oracle.Exadata <<<<<<<<<<<<<<<<<<<<<<This script will be run automaticlly, when the OS starts

fi

########### END DO NOT REMOVE Added by Oracle Exadata ###########

-----------------------------------------

2. 查看rc.Oracle.Exadata，找到/opt/oracle.cellos/vldrun -all

# vi /etc/rc.d/rc.Oracle.Exadata

-----------------------------------------

# Perform validations step

/opt/oracle.cellos/vldrun -all <<<<<<<<<<<<<<<<<<<<<<This script will be run automaticlly, when the OS starts

-----------------------------------------

3. 检查当前OSwatcher的设定，每15秒收集一次，生成的日志保存168小时（7天），bzip2的压缩模式，最大日志尺寸是3G

# ps -ef | grep OSW

root 15962 1 0 04:00 pts/1 00:00:00 /bin/ksh ./OSWatcher.sh 15 168 bzip2 3

root 15994 15962 0 04:00 pts/1 00:00:00 /bin/ksh ./OSWatcherFM.sh 168 3

root 16272 9529 0 04:00 pts/1 00:00:00 grep OSW

4. 脚本/opt/oracle.cellos/vldrun会调用oswatcher脚本来启动oswatcher

# ls -al /opt/oracle.cellos/validations/init.d/oswatcher

-r-xr-x--- 1 root root 5128 Aug 19 03:39 oswatcher

# chmod 750 oswatcher <<<<<<<<<<<<<<<<<<<<<<<<Change the right, then we can edit it as per our expected.

# ls -al oswatcher

-rwxr-x--- 1 root root 5128 Aug 19 03:39 oswatcher

5. 检查当前oswatcher脚本中的设定，并修改（本次修改将原有的最大保存3G的日志，修改为最大日志尺寸为4G）

# vi oswatcher

----------------------------------------

fi

(umask 0037; nohup ./startOSW.sh 15 168 bzip2 4 >/var/log/cellos/start_oswatcher.log 2>&1 &)& <<<<<<<<<<<<change this part of the script, will let the script run as per our expected.

# Dont direct logs to startosw.log. It grows too large and fast

# (nohup ./startOSW.sh 15 168 bzip2 3 >/dev/null 2>&1 &)&

popd >/dev/null

----------------------------------------

6. 停止oswatcher

#/opt/oracle.oswatcher/osw/stopOSW.sh

# ps -ef | grep OSW

root 10528 9529 0 03:59 pts/1 00:00:00 grep OSW

7. 手动启动oswatcher

# /opt/oracle.cellos/vldrun -script oswatcher

Logging started to /var/log/cellos/validations.log

Command line is ./validations/bin/vldrun.pl -quiet -script oswatcher

Run validation oswatcher - PASSED

The each boot completed with SUCCESS

8.再次检查OSwatcher的设定，最大日志尺寸已经改为4G

# ps -ef|grep OSW

root 109041 1 0 03:37 pts/1 00:00:00 /bin/ksh ./OSWatcher.sh 15 168 bzip2 4

root 109073 109041 0 03:37 pts/1 00:00:00 /bin/ksh ./OSWatcherFM.sh 168 4

root 109348 59019 0 03:37 pts/1 00:00:00 grep OSW

更对oswatcher细节，可以参考以下官方文档(注：目前文档1585389.1中已经记录如何永久修改exadata上osw的设定， 但是本人测试的时候，该文档并没有相关记录)

OSWatcher does not Retain Data for the Full Retention Period Specified (Doc ID 1585389.1)

OSWatcher Black Box (Includes: [Video]) (Doc ID 301137.1)

©著作权归作者所有：来自51CTO博客作者hsbxxl的原创作品，如需转载，请注明出处，否则将追究法律责任

oraclesizeexadataOracle